Available with the option of bolted or welded corner joints.
- Complete with net brackets and ground frame
- Post end caps and 30 net hooks
- Post/crossbar from 80x80 mm tubing
- Goal depth: upper 1.03 m
- Goal depth: lower 1.20 m
- Anodised surface
- Matt silver with black, red or blue plastic strips
- For indoor and outdoor use
Our reliable handball goals, of course, comply with EN 749 and are TÜV-approved.
There are no comparable aluminium goals with this stability and sturdiness.
Many goal constructions with net brackets made from only 30-mm aluminium tubing are still available but they often have the disadvantage of lacking stability. They bend and sometimes even break.
These problems have been convincingly solved with a net bracket construction made from galvanised steel tubing. Alongside the solid cast aluminium corner joints, especially long galvanised flat angle irons
, which are bolted to the crossbar/post area, provide this goal with additional stability
. The stability of the whole goal construction is increased by galvanised steel ground tubing which is bolted between the net brackets at ground level.
Top-level handball goals meeting the high demands of modern handball. The goal must be anchored in compliance with EN regulations. The corresponding holes are already made in the net brackets.
Ground anchoring for indoor use can be found under product code: 1154900.DIN EN 749 states that goals must be secured against moving and tipping
and be able to withstand a horizontal force of 950 N on the crossbar. The owner is responsible if a goal is used without the required ground anchoring and an accident occurs!Recommended nets:
Goal depth: upper 80 cm / lower 100 cm
- 4-mm polypropylene net, green, product code 1153604 or yellow 1153617
- 5-mm polypropylene net, green, product code: 1153806 or white 1153819