The mobile high jump mat cover – with clamping lever
The mobile cover essentially fully encloses the high jump mat. Its roof panels are plated on an aluminium frame, while the side panels consist of aluminium cassettes. This provides additional protection against weathering (incl. the sun) and vandalism. The two-part cover is connected using a clamping lever. It is water-repellent but not waterproof, we therefore recommend using an additional rain cover.
Product information- Fully enclosed aluminium construction
- Max. load per m²: 200 kg
- Supplied with 4 rigid, concealed castors
- Lockable, padlock (suitable for 10-mm-diameter hole) can be attached to the clamping lever – must be ordered separately
- Unloading requires a forklift and two people to assist. At least six people must be available to assist if there isn't a forklift.
Cover dimensions
The covers are produced specifically for the size of the mat. To determine the correct size of the cover, you must add 20 cm to the height of your mat. The extra 20 cm allows 10 cm for the base platform and 10 cm for some clearance. So, if your mat has a height of 50 cm, the cover must be 70 cm high. The cover must also be 50 cm longer and 50 cm wider than the mat.
Variants- 450×300×70 cm: approx. 290 kg, for 400×250×50 cm mats
- 450×350×70 cm: approx. 350 kg, for 400×300×50 cm mats
- 550×350×70 cm: approx. 435 kg, for 500×300×50 cm mats
- 550×450×70 cm: approx. 580 kg, for 500×400×50 cm mats
- 650×350×70 cm: approx. 522 kg, for 600×300×50 cm mats
- 650×450×70 cm: approx. 700 kg, for 600×400×50 cm mats
- 550×350×70cm: approx. 610 kg, for 500×300×50 cm mats
- 650×450×70 cm: approx. 725 kg, for 600×400×50 cm mats
Extras available on request:- Swivel castors
- Lowering feature – the complete unit can then be lowered to the ground
- Folding mechanism on one side, if the unit can only be pushed from one side